Ingersoll-Rand AVC Series, Информация о продукте

Страница: 4 / 56

EN
EN-2 03528742_ed15
Setting the Power Regulator
With the exception of the AVC10C1, all the Riveters have a power regulator that allows the operator to adjust power output. To adjust the
power, proceed as follows:
CAUTION
Never operate the tool unless an accessory is properly installed and held firmly against the work.
Experience will indicate how much power regulation is required for each job.
For Models AVC10, AVC12, AVC13
For full power, rotate the Throttle Adjusting Knob counterclockwise until you get full trigger travel (maximum power).
For reduced power, rotate the Throttle Adjusting Knob clockwise until you get less trigger travel (less power).
For Model AVC26B1
For full power, rotate the Power Adjusting Valve counterclockwise.
For reduced power, rotate the Power Adjusting Valve clockwise.
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that
they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.