Ingersoll-Rand ARO PX20P A Series, Руководство оператора

Страница: 1 / 12

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
OPERATOR’S MANUAL PX20P-XXX-XXX-AXXX
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE
RELEASED: 12-16-02
REVISED: 5-3-19
(REV: T)
2" DIAPHRAGM PUMP
1:1 RATIO (NON-METALLIC)
SERVICE KITS
Refer to Model Description Chart to match the pump material
options.
637373-XXX
for fl uid section repair
with
seats (see page 5).
637373-XX for fl uid section repair without seats (see page 5).
NOTE:
This kit also contains several air motor seals which will
need to be replaced.
637369
for air section repair (see page 7).
637374-X
major air valve assembly (see page 8).
PUMP DATA
Models . . . . . .
see Model Description Chart for “-XXX”.
Pump Type . . . .
Non-Metallic Air Operated Double Diaphragm
Material . . . . . see Model Description Chart.
Weight . . . . . . .
PX20E-FES-XXX . . . . . . . 85.3 lbs (38.7 kgs)
PX20P-FKS-XXX . . . . . . . 110.9 lbs (50.3 kgs)
PX20E-FNS-XXX . . . . . . . 110.9 lbs (50.3 kgs)
PX20P-FPS-XXX . . . . . . . 85.3 lbs (38.7 kgs)
Maximum Air Inlet Pressure
. . . . . . . . . 120 psig (8.3 bar)
Maximum Material Inlet Pressure
. . . . 10 psig (0.69 bar)
Maximum Outlet Pressure
. . . . . . . . . . . 120 psig (8.3 bar)
Maximum Flow Rate
(flooded inlet)
. . . . . . . . 184 gpm (696 lpm)
Displacement / Cycle @ 100 psig
. . . . . 1.4 gal. (5.3 lit.)
Maximum Particle Size . . . . . . . . . . . . . . 1/4” dia. (6.4 mm)
Maximum Temperature Limits (diaphragm / ball / seal material)
E.P.R. / EPDM . . . . . . . . . . . . . . . . -60
0
to 280
0
F (-51
0
to 138
0
C)
Hytrel
£
. . . . . . . . . . . . . . . . . . . . . -20
0
to 180
0
F (-29
º
to 82
0
C)
Nitrile . . . . . . . . . . . . . . . . . . . . . . 10
0
to 180
0
F (-12
º
to 82
0
C)
Polypropylene . . . . . . . . . . . . . . 32
0
to 175
0
F (0
0
to 79
0
C)
PVDF (Kynar
£
) . . . . . . . . . . . . . . 10
0
to 200
0
F (-12
0
to 93
0
C)
Santoprene
£
. . . . . . . . . . . . . . . -40
0
to 225
0
F (-40
0
to 107
0
C)
PTFE . . . . . . . . . . . . . . . . . . . . . . . 40
0
to 225
0
F (4
0
to 107
0
C)
Viton
£
. . . . . . . . . . . . . . . . . . . . . . -40
0
to 350
0
F (-40
0
to 177
0
C)
Dimensional Data
. . . . . . . . . . . . see page 9
Mounting Dimension
. . . . . 8.18” x 14.16” (207.8 mm x 359.7 mm)
Noise Level @
70 psig, 60 cpm . . . . . . . . 85.0 dB(A)
c
c The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (LA
eq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP
S5.1 using four microphone locations.
PD20X
PE20X
Figure 1