Ingersoll-Rand 45P3, Информация о продукте

Страница: 3 / 16

80167596_ed1 EN-1
EN
Product Safety Information
Intended Use:
These tools are designed to remove and install threaded fasteners.
For additional information refer to Air Pulse Tool Product Safety Information Manual
Form 04584983.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet.
Drain condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily.
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device
across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails
or coupling disconnects. See drawing 16585747 and table on page 2. Maintenance
frequency is shown in circular arrow and defined as h=hours, d=days, and m=months.
Items identified as:
After each 20,000 cycles , or as experience indicates, drain and refill the Impulse Unit
Drive Assembly using the Fluid Replacement Kit (Part No. EQ106S-K400). Lubricate the
hex drive and the output shaft before assembly.
Model(s) Style
Drive Free Speed
Type Size rpm
45PQ1 Pistol Insert Bit 1/4” 8,000
45P3 Pistol Square 3/8” 8,000
90P4 Pistol Square 1/2” 6,000
70P3 Pistol Square 3/8” 7,000
55PQ1 Pistol Insert Bit 1/4” 8,000
60PQ1 Pistol Insert Bit 1/4” 6,600
55P3 Pistol Square 3/8” 8,000
60P3 Pistol Square 3/8” 6,600
1. Air filter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-off valve 9. Oil
5. Hose diameter