Ingersoll-Rand 2135PTiMAX, Информация о продукте

Страница: 4 / 60

EN-2 45534062_ed4
EN
Models
Impacting Sound Level
dB(A)
(ISO15744)
Free Speed Sound Level dB(A)
(ISO15744)
Vibration (m/s²)
(ISO28927)
† Pressure
(L
p
)
‡ Power (L
w
) † Pressure (L
p
) ‡ Power (L
w
) Level *K
2135TiMAX
2135TiMAX-AP
99.8 110.8 109.2 120.2 13.3 4.6
2135Ti-2MAX
2135Ti-2MAX-AP
99.8 110.8 109.2 120.2 9.7 1.8
2135QTiMAX
2135QTiMAX-AP
94.2 105.2 86.0 97.0 13.3 4.6
2135QTi-2MAX
2135QTi-2MAX-AP
94.2 105.2 86.0 97.0 9.7 1.8
2135QPTiMAX
2135QPTiMAX-AP
94.2 105.2 86.0 97.0 13.3 4.6
2135PTiMAX
2135PTiMAX-AP
99.8 110.8 109.2 120.2 13.3 4.6
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 47132782 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter 7. Coupling
2. Regulator 8. Safety Air Fuse
3. Lubricator 9. Oil
4. Emergency shut-off valve 10. Grease - during assembly
5. Hose diameter 11. Grease - through fitting
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.