Ingersoll-Rand 2135PTi, Инструкция по эксплуатации

Страница: 2 / 32

2
Using the Tool (Continued)
•
Impact Wrenches are not torque wrenches. Connections
requiring specific torque must be checked with a torque
meter after fitting with an impact wrench.
•
Periodically check the drive end of the tool to make cer-
tain that the socket retainer functions correctly, and that
sockets and drive ends are not excessively worn which
may allow the socket to come off when rotating.
The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool
performance, and increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll-Rand Authorized
Servicenter.
WARNING SYMBOL IDENTIFICATION
USING THE POWER MANAGEMENT SYSTEM
Impact Wrenches are not torque wrenches. Connections
requiring specific torque must be checked with a torque
meter after fitting with an impact wrench.
(Dwg. TP2081)
The 2135Ti series of Impact Wrenches incorporates a Power
Management System that allows the operator to select four
power output settings. These settings range from minimum
power output through maximum power output in the clock-
wise direction only.
The Air Wrench will always operate
at maximum power output in the counterclockwise direction,
no matter what power output level is selected. The four
power setting indicators of increasing size on the rear of
the housing indicate increasing power output levels, are for
reference only and DO NOT denote a specific power output.
The smallest power setting indicator designates minimum
power output, the two middle power setting indicators
denote medium power outputs and the largest power setting
indicator denotes maximum power output. The power output
can be further reduced in clockwise or counterclockwise by
using the variable throttle. Air supply systems which do not
deliver adequate air pressure can affect power output at all
settings.
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.
WARNING
Read this manual before
operating tool.
WARNING
Always wear hearing
protection when operating
this tool.
POWER MANAGEMENT SYSTEM
POWER SETTING INDICATORS
MAXIMUM MINIMUM
POWER
REGULATOR