14
PART NUMBER FOR ORDERING
PART NUMBER FOR ORDERING
♦ •
41
Hammer Case Gasket . . . . . . . . . . . . . . . . . . .
401–36
58
Body Lock Pin . . . . . . . . . . . . . . . . . . . . . . I0A902A5–936
42
Hammer Case Cap Screw (3) . . . . . . . . . . . . .
1702–638
59
Thrust Ring Lock . . . . . . . . . . . . . . . . . . . . 4U–933–7
43
3/8” Square Drive Anvil Assembly
60
Thrust Ring . . . . . . . . . . . . . . . . . . . . . . . . 4U–932–7
(with pin–type retainer) . . . . . . . . . . . . . . . . .
1702–P726
61
Retaining Sleeve Spring . . . . . . . . . . . . . . . 4U–931–7
♦
44
Socket Retaining Plunger . . . . . . . . . . . . 2902–716
62
Retaining Ball (7/32” diameter steel) . . . . 2U–722
♦
45
Retaining Plunger Spring . . . . . . . . . . . . 401–718
63
Retaining Sleeve . . . . . . . . . . . . . . . . . . . . I0A902A5–930
46
3/8” Square Drive Anvil Assembly
*
Tune–up Kit (includes illustrated parts 3, 4,
(with ring–type retainer) . . . . . . . . . . . . . . . .
1702–A626
6A [4], 9 [2], 11, 13, 14, 16, 18, 23, 24, 25, 28,
47
Socket Retaining Ring . . . . . . . . . . . . . . 1702–425
31, 41, 44 and 45) . . . . . . . . . . . . . . . . . . . . . . . . 1702SB–TK2
48
Retainer Support Ring . . . . . . . . . . . . . . 1702–426
66
Vertical Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . 1901–365
Quick Change Anvil Assembly . . . . . . . . . . .
1702–A926–4
67
Horizontal Hanger . . . . . . . . . . . . . . . . . . . . . . . . 1901–366
49
Anvil (1/4” hex recess) . . . . . . . . . . . . . 1702–926–4
*
Socket Adapter (3/8” to 1/2”) . . . . . . . . . . . . . . . 2U–215
50
Thrust Ring Lock . . . . . . . . . . . . . . . . . . 5C1–853
*
Lube Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230–228
51
Thrust Ring . . . . . . . . . . . . . . . . . . . . . . I0A902A2–932–4
*
Bottle of Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405–M01
52
Retaining Sleeve Spring . . . . . . . . . . . . . 2U–93l–4
*
Tube of Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . 201–MG1
53
Retaining Ball (5/32” diameter steel) . . 2U–696
*
Quick–Change Chuck
54
Retaining Sleeve . . . . . . . . . . . . . . . . . . 211–930–4
for 1/4” hex shank accessories . . . . . 2U–A925–4
55
Retaining Sleeve Stop . . . . . . . . . . . . . . 2U–933–4
for 7/16” hex shank accessories . . . . 502–A925–7
Quick–Change Anvil Assembly . . . . . . . . . .
1702–A926–7
56
Quick–Change Anvil . . . . . . . . . . . . . . . 1702–926–7
57
Anvil Body (7/16” hex recess) . . . . . . . . I0A902A5–925
*
Not illustrated.
•
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part indicated by a
bullet (
•
) for every four tools in service.
♦
Indicates Tune–up Kit part.
