13/28 Lane/7000 /
90002783 R11 000 01
Copyright © 2014 Ingenico / All rights reserved
3_5
Installation & Connections
3_5_1
Positioning the terminal
Place the terminal with an easy access to an electrical outlet. Place the terminal away from any heat
source and protected from dust, vibrations and electromagnetic radiations (away from video terminals,
PC, anti-shoplifting barriers ...). The terminal is exclusively made for indoor use.
The Lane/7000 device may be mounted on a flat surface, wall, or customer stand.
CAUTION
Do not place the Lane/7000 device on a PC monitor, adjacent to an electronically active
security tag deactivation system, or near other sources of magnetic fields.
The
Lane/7000 device must be at least 30 centimeters (12 inches) away from an electronically active
type of security tag deactivation pad.
There are two
types of security tag deactivation systems:
An electronically active system sends out a powerful and potentially disruptive signal to deactivate
the security tag. If the Lane/7
000 device is placed too close to the system’s pad, or placed above
the pad, the product may not work properly.
A passive system is a permanent magnet type that does not send out a signal. This type should
not affect the Lane/7000 device
.
3_5_2
Inserting SAM (Secure access module) and Micro SD
CAUTION
Before starting, switch off the terminal by disconnecting the power supply.
Perform the following operations:
Unscrew the modules and remove them both
Access to SAM and Micro SD is now possible.