Intégration Guide_iUI120
43/58
Copyright © 2013 Ingenico
900016253 R11 000 01/1416
All rights reserved
5 INSTALLATION PROCEDURE IN KIOSKS
Note: It is required to use
ESD-protective clothing
while handling these devices.
5.1 SECURITY REQUIREMENT IUI120
Your device fulfils current applicable PCI PTS security requirements.
Upon receipt of your terminal you should check for signs of tampering of the
equipment. It is strongly advised that these checks are performed regularly after
receipt. You should check, for example: that the keypad is firmly in place; that there is
no evidence of unusual wires that have been connected to any ports on your terminal
or associated equipment, the chip card reader or any other part of your terminal.
Such checks would provide warning of any unauthorised modifications to your
terminal, and other suspicious behaviour of individuals that have access to your
terminal. Your terminal detects any “tampered state”. In this state the terminal will
repeatedly flash the message” Alert Irruption!” and further use of the terminal will not
be possible. If you observe the “Alert Irruption!” message, you should contact the
terminal helpdesk immediately.
You are strongly advised to ensure that privileged access to your terminal is only
granted to staff that have been independently verified as being trustworthy.
The terminal must never be put in or left at a location where it could be stolen or
replaced by another device.
