Ingenico APOS A8, Руководство пользователя

Страница: 10 / 16

Using the power adapter

Connect the power adapter to the terminal micro USB type A connector located
on the left side of the terminal.

Connect the power adapter to the power supply mains network.

Check if the Red LED at the top of front is lighted. (It means battery charging)
4.5.3 Headphone Jack & Micro USB
There is a 3.5mm headphone jack and a Micro
USB A connector on the left side of the
terminal.
The connector manages Host and Slave
connections.
4.5.4 Usage of Front Scanner

The brightness of the mobile phone must be set to the brightest or not less than the
2/3 of the maximum brightness.

The screen of the mobile phone must be
toward to the front scanning head
above the terminal screen and then
keep it stationary.

The screen of the mobile phone must
parallel the front scanning head.

The vertical distance between the
screen of the mobile phone and the
front scanning head should be 10~ 30 cm;
and 20 cm would be the best.

The terminal will beep with a successful
scanning.