Ingenico group Telium TETRA Move/5000 Скачать руководство пользователя страница 10

Страница: 10 / 92

Page 10

Move/5000 User Guide

Terminal Connections

µUSB

•

There is a Micro-USB connector on the left side of the Move/5000 wireless
terminal. (see picture). This connector manages Host and Slave
connections.

•

The terminal supports USB
keys with FAT16 or FAT32

•

The USB key has to be used
with a USB adapter (refer to
accessories section)

µSD Memory Card

•

There is a MicroSD connector
on the left side of the
Move/5000 wireless terminal.
(see picture).Insert the
MicroSD memory card into
the connector slot shown on
the picture.

•

The

terminal supports

MicroSD cards up to 32GB.

NOTE: The above slots are NOT currently supported in the
terminal applications. They are currently only used during
production

USB micro AB

Connector used for USB key etc.

Durability: up to 10,000 mating cycles

MicroSD Slot

Содержание Telium TETRA Move/5000

















































































Результаты поиска

Содержание Telium TETRA Move/5000

Отзывы:

Ingenico group Telium TETRA Move/5000, Руководство пользователя, Страница: 10 / 92

Результаты поиска

Содержание Telium TETRA Move/5000

Отзывы: