13
Reset
In case the «Click - STANDBYKILLER» stops responding for any unknown reason
please perform the following steps:
1. Meter Unit: Unplug it from you power outlet, wait a few seconds then plug it
back in.
2. Remote Unit: Press and hold down for 15 seconds.
Wireless Connection
«Click - STANDBYKILLER» operates via a wireless connection with a range of up
to 10m line-of-sight. This gives you the ability and fl exibility to use it anywhere in
your room. If the two units are too far away from each other, or the Meter Unit is
unplugged from the mains outlet, the Remote Unit will show (- - - -) on the display
(Fig. 5), 1 min later, the remote unit will turn off automatically.
FAQ
Q:
The display on the Remote unit has turned black after direct sunlight exposure. It
is not possible to read anything. What can I do? (Fig. 6)
A:
This happens when the display has been exposed to direct sunlight thus warming
up. Such heat makes the display turn black. Put the Remote Unit in a cool place away
from direct sunlight and it will slowly turn back to normal.
Q:
The Remote Unit shows (- - - -) on the display, and the Meter unit is plugged in.
What does that mean? (Fig.7)
(Fig. 5)
(Fig. 7)
(Fig. 6)
