12
By connecting several devices at once by means of a socket strip, you can now measure the sum of the power
consumed of all the connected devices in all operating states. (Fig. 3)
(Fig. 3)
The Remote Unit is solar powered and communicates with the Meter Unit by means of a wireless connection. Each
pair has its own unique wireless code allowing the use of more than one «Click - STANDBYKILLER» in the same
room at the same time.
Operation
When you use «Click - STANDBYKILLER» for the fi rst time or when the device is kept in the dark for several days, the
display goes blank. Please expose the Remote unit to light for a few minutes. After
doing so, press it down to turn it on.
Power Saving Mode (Push Mode)
If the Remote Unit is kept in the dark or under low light for several hours, it will
automatically go in power saving mode, showing “PUSH” on the display. (Fig. 4) You
can wake up the Remote Unit back to normal operation (...W) by pressing it once. After
a few minutes it goes back to power saving mode.
(Fig
(Fig. 4)
