Operating Manual
3.3
Understanding the Parts and Controls
1)
Universal Viewing System (not available on
‘K’ models)
2)
Hand straps and pads
3)
Lens window
4)
Battery compartment (including battery
contacts, and thermal imager identification
and warning label)
5)
Mounting bracket and lanyard ‘D’ ring
6)
LCD Display
7)
LED
8)
Red button
9)
BNC connector and dust cover
10)
Yellow button
3.4
Charging the Battery
Information
All batteries are fully charged on leaving the factory and are ready for immediate use.
WARNING
Do not expose the battery charger unit and/or power adapter to rain or moisture.
Do not attempt to use a charging device to charge a non-ISG INFRASYS approved battery.
To install your VMC or VMTC battery charger, please refer to the installation guide enclosed.
Always check the charging device is in good working order before each use.
© Copyright 2011, Infrared Systems Group Ltd.
Page 8 of 34
While ISG Infrasys has taken care to ensure the accuracy of the information contained herein, it accepts no responsibility for
the consequences of any use thereof and reserves the right to change the specification of goods without notice.
