4
4.
Place the right side panel against the front panel about 2 inches higher and slide down
into the slot of the floor panel until they are equal in height. As you slide down make sure
the connectors on the right side panel are securely fastened to those on the edge of the
front panel.
5.
Place the back panel against the left and right side panels about 2 inches higher and slide
down into the slot of the floor panel until they are equal in height. As you slide down
make sure the connectors on the left and right side panels are securely fastened to those
on the back panel.
6.
Slide the two side-bench support panels down the wooden supports with the calf heaters
facing out. Make sure the two side slots of the bench support panel slide completely into
the corresponding grooves of the wooden supports.
7.
Slide the back-bench support panel down the wooden supports with the calf heater
facing out. Make sure the two side slots of the bench support panel slide completely into
the corresponding grooves of the wooden supports.
8.
Connect all the wires accordingly. Ensure all the calf heaters and the floor heater are
connected.
