background image

 

29 

WA R R A N T Y  

 

N O T I C E

 

T O

 

B U Y E R

 

A N D / O R   U S E R   O F   T H E   A N A L Y Z E R :

 

 

Exclusion of warranties and limitation of damages and remedies 

 

This analyzer is warranted against defects in materials and workmanship under normal use and 
service for one year from the date of delivery to the original purchaser. 

 

The sole obligation of the seller and/or manufacturer under this warranty is limited to repairing or 
replacing as the seller or manufacturer may elect, free of charge at the place of business of the seller or 
manufacturer, any parts that prove, in the seller or manufacturers judgment, to be defective in 

materials or workmanship within one year after delivery to the original purchaser.  

 

This warranty shall not apply and is void if, in the opinion of the seller and/or manufacturer, the 
portable analyzer or any component thereof has been damaged by accident, other causes not arising 

out of defects in materials or workmanship. 

 

Before purchasing and using this analyzer, the user should determine the suitability of the product for 

his or her intended use and, the user assumes all risks and liabilities whatsoever in connection 
therewith. 

 

If a product malfunction should occur, you may contact the seller or the manufacturer at: 

 
 

Infrared Industries, Inc. 

25590 Seaboard Lane 

Hayward, Ca. 94545 
Voice: 510-782-8100 or 800-344-0321 

E-mail: [email protected] 

 

W A R R A N T Y   E X C L U S I O N S  

 

THIS WARRANTY AND THE SELLER AND/OR MANUFACTURER'S OBLIGATION HEREUNDER IS IN LIEU OF ALL 
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER REPRESENTATIONS 

CONCERNING THE SALE, USE AND/OR PERFORMANCE OF THE ANALYZER. 

 
No person is authorized to give any other warranties or to assume any other liability on behalf of the 

seller or manufacturer.  This warranty shall not be extended, altered or varied except by written 

agreement signed by the seller and the buyer. 

Содержание IR208

































Отзывы: