10
R E A R P A N E L
Figure 2: Rear Panel
1.
AC Power socket and Fuses
- Fuses installed below the AC power socket provide
protection from electrical overload.
2.
Analog Outputs
– Allows connection to a recording device. Output is DC voltage
and the range is specified at the time of purchase. Optionally 4-20 analog outputs
can be configured on these connectors.
3.
Serial RS232 Connector
- The serial Communication Port allows the analyzer to
be connected to a PC-compatible computer or a printer. Set the proper
Configuration based on the device that will be attached (see Configuration Menu ->
Serial Port).
4.
Zero Port
– this is an optional port where zero gas can be connected.
5.
Sample
Gas
Inlet
Port
6.
Sample
Gas
Exhaust
Port
7.
Pump Switch (Optional)
