T-CAM 380 P-SERIES USER MANUAL
45
8-38
Factory Reset the Device
If measurements are skewed the user should try adjusting the emissivity and
ambient temperature before attempting to restore factory setting. Restore
default settings as follows:
1.
Press the Menu button or tap the touchscreen to display the Main Menu.
2. Select the Settings icon:
3. Press the OK button to open Sub-menu.
4. Select System Settings.
5. Press the OK button.
6. Select Restore Factory Settings.
7. Press the OK button.
8. Press the OK button again to confirm. Device Settings will reset to factory
settings. Press Previous button to cancel.
9. Press the Previous button continuously to exit the menu.
PERFORMING A FACTORY RESET ERASES CUSTOMIZED USER
CONFIGURATIONS STORED ON THE DEVICE AND RESTORES THE ORIGINAL
DEFAULT SETTINGS PROGRAMMED BY THE MANUFACTURER. THE PROCESS
CANNOT BE UNDONE.
PERFORMING A FACTORY RESET WILL NOT FORMAT THE MEMORY CARD
HOWEVER USERS MAY WISH TO REMOVE THE MEMORY CARD BEFORE
ATTEMPTING A FACTORY RESET OF THE DEVICE.
