30
4.6.1
Measuring setting
Measuring setting Menu
Press OK button to call out the Setting Menu. Select “Measuring Setting”,then press “OK”
again to call out the setting interface. In this interface ,Level ,magnification,Environment
Temp,Ref Temp can be set. Use UP &Down button to select ,” >” means there is sub menu, press
Right Button to enter the sub menu.
Level
：
Seeting the Measuring Level of the thermal camera.
Magnification
：
Seeting the Magnification and the different Temp range.
Environment Temp
：
It will automaticly detect the Environment Temp after the
camera start-up.
Ref Temp
：
When it is enabled , the target temperature shown on the LCD is the
D-Value between the real temp and the Ref-Temp.
Ref Temp Menu
