InfraBeam IB2017-1, Инструкция по эксплуатации

Страница: 5 / 24

Displayer on the control panel:
1. Over time warnings: In 5 different languages,
2. Over heat warnings: In 5 different languages,
3. Power setting bars of the left two heating tubes,
4. Digital displayer for showing temperature and standby mode,
5. Temperature unit,
6. Power setting bars of the right two heating tubes.
Operation of the grill
If the power supply cord or tubes are damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
Turn on/Off the Grill:
Plug the grill to power supply, the grill goes into a "stand by" mode, the digital displayer show "OFF" without
back light.
Push both knobs and keep in depressed position for 3 seconds, the grill turns to "work" mode, the back
light of the displayer turns on, and displayer shows a temperature.
Push both knobs again for 3 second to turn the grill back to "stand by" Mode.
To select language:
Push and keep the left knob in depressed position for 3 seconds, all warning words are showed on the
screen, the selected language is blinking. Release the knob, push again to select a language. When a new
language is selected, release the know for 3 seconds, all warning words disappear on the screen and the
new languish selected.
To select Temperature unit:
Push and keep the right knob in depressed position for 3 seconds, the temperature unit shifts from "C" to
"F" and
vise versa.
To adjust power of heating tubes:
The left control knob controls the total power of two left tubes, and the right knob controls the total power of
two right tubes. Increase the power by turning the relative knobs clockwise, reduce the power by turning
the relative knob counter-clockwise. Each side has 7 power settings but both sides totally have 8 settings.
Accordingly, the power setting bars show the setting of the power. The more bars show, the higher power
the relative tubes are.
In addition, This grill has a power limit function, the total power of all heating tubes do not exceed the Max
rated power, and accordingly, the total number of the power setting bars would not exceed 8, which could
1
2
3 4 6
5