Infotec ISC 615 G Скачать руководство пользователя страница 74

Страница: 74 / 134

Troubleshooting When Using the Scanner Function

Scanner is not

available on the

specified de-

vice.

The TWAIN scanner function
cannot be used on this machine.

Contact your service representa-
tive.

Scanner is not

available. Check

the scanner con-

nection status.

• The machine's main power

switch is off.

• The machine is not connected

to the network correctly.

• Set the main power switch to

“On”.

• Check whether the machine is

connected to the network cor-
rectly.

• Deselect the personal firewall

function of the client compu-
ter.

• Use an application such as tel-

net to make sure SNMPv1 or
SNMPv2 is set as the ma-
chine’s protocol. See “Net-
work Settings”, General
Settings Guide and “Using
telnet”, Network Guide.

No response from

the scanner.

The machine is not connected to
the network correctly.

Check whether the machine is
connected to the network correct-
ly.

No response from

the scanner.

The network is crowded.

Wait for a while, and then try to
reconnect.

Error has oc-

curred in the

scanner.

The application-specified scan
conditions have exceeded the set-
ting range of the machine.

Check whether the scanning set-
tings made with the application
exceed the setting range of the
machine.

Fatal error has

occurred in the

scanner.

An unrecoverable error has oc-
curred on the machine.

An unrecoverable error has oc-
curred in the machine. Call your
service representative.

Cannot connect

to the scanner.

Check the net-

work Access Mask

settings in User

Tools.

An access mask is set.

Contact the administrator.

Scanner is not

ready. Check the

scanner and the

options.

The ADF, or ARDF cover is open. Check whether the ADF, or

ARDF cover is closed.

Message

Cause

Solution

Содержание ISC 615 G






































































































































Результаты поиска

Содержание ISC 615 G

Отзывы:

Похожие инструкции для ISC 615 G

Бренды по названию

Популярные бренды

Infotec ISC 615 G, Руководство по эксплуатации

Результаты поиска

Содержание ISC 615 G

Отзывы:

Похожие инструкции для ISC 615 G

Бренды по названию

Популярные бренды