INFOSEC X4 1000 VA, Руководство пользователя

Страница: 7 / 48

INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 07 11 AA 59 205 30
7
The main functions are as follows:
- Transmission of a visual alarm in event of power failure
- Automatic file closure prior to the battery going flat
- Computer & UPS shutdown
For more information, go to the website: www.infosec-ups.com
7 . B A T T E R Y
The battery is the only UPS component which is not in permanent use. It has a useful life of
approximately 3 to 5 years. However, frequent major discharges or exposure to
temperatures over 20

C will shorten its life span. We therefore recommend that users
recharge the battery once every 3 months when the unit is not in use in order to compensate
for natural discharging. UPS backup time will depend on the powered load, as well as the
age and condition of the batteries.
WARNING!
Batteries should always be replaced by qualified technicians. Batteries have a very high
short circuit current:
connection errors could cause electric arcs resulting in
serious burns .
8 . T R O U B L E S H O O T I N G
Should the UPS fail to function correctly we recommend you perform the following tests
before calling the Hot Line.
Check list:

Is the main switch in the “ON” position?

Is the UPS plugged into the mains power supply?

Does the power supply fall within specified unit values?

Has the fuse gone in the mains plug?

Is the UPS overloaded?

Is the battery flat or defective?
PROBLEM POSSIBLE CAUSE SOLUTIONS
No LED (or no words)
display on front panel.
Low battery. Charge battery for up to 6 hours.
Faulty battery. Replace with the same type of battery.
UPS is not turned on.
Press the power switch again to turn on
the UPS.
Alarm continuously
sounding when mains is
normal.
UPS overload.
Check that the load matches the UPS
capability stipulated in the specifications.
In the event of power
failure, backup time is
shortened.
UPS overload. Remove some non-critical load.
Battery voltage too low. Charge battery up to 6 hours.
Battery defect due to high
temperature operating
environment, or improper
use of battery.
Replace with the same type of battery.
Mains normal but the unit
is on battery mode
Loose power cord. Connect the power cord properly.