INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - [email protected] – 03 15 AA 59 204 31
2
User guide
To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
This UPS range is specially designed for multimedia Home Computers and computer
systems in small-sized companies. Its lightweight and compact design is ideal for working
environments where space is limited.
The X1 EX range is Auto-Regulated to provide balanced output power and offer complete
protection for your connected equipment in the event of power cuts or fluctuations. X1 EX
will keep your connected equipment powered up for several minutes. This will allow you to
close your program(s) and shut the system down correctly. The main features of the X1 EX
range are given below.
2 . M A I N C H A R A C T E R I S T I C S
A highly-reliable microprocessor control
Automatic output voltage regulator (AVR)
Cold start feature if no power supply
Off-mode charging
Automatic restart during AC power recovery
Compact size, light weight
USB communication port (optional for all models)
3 . S A F E T Y I N S T R U C T I O N S – S e c u r i t y
Risk of electric shock:
The UPS unit uses potentially hazardous voltages. Do not attempt to disassemble
this equipment as it does not contain accessible components that can be repaired by
users.
All repairs should be performed by qualified technicians only.
The utility power outlet shall be near the equipment and easily accessible. To isolate
the UPS from AC input, remove the plug from the utility power outlet.
The mains outlet that supplies the UPS shall be located near the UPS and shall be
easily accessible.
The UPS has its own internal power supply (battery). There is a risk that output
sockets may still be live after the UPS has been disconnected from the mains power
supply.
Install the UPS in a temperature and humidity-controlled indoor area free of
conductive interference.
It should not be exposed to direct sunlight or sources of heat. Do not cover the
ventilation slots.
Disconnect the UPS from AC power before cleaning with a damp cloth (no cleaning
products).
In an emergency situation, switch the UPS to the “Off” position and disconnect the
unit from the AC power supply.
When the UPS is out of order, please refer to “
section 10: trouble shooting
” and
call the hot line.
