manualshive.com logo in svg

Infortrend EonStor GSa 5000 Series, Руководство по оборудованию

Поделиться
Скачать
Infortrend EonStor GSa 5000 Series Скачать руководство пользователя страница 71

4-11

EonStor GSa 5000 Series Hardware Manual

4.1.6  Replacing the cooling module

WARNING!  

Although the system can operate with a failed cooling module, it is not recommended 

to run the systems with a failed cooling module for long periods. You must replace the failed cooling 

module immediately for your system’s proper ventilation.

IMPORTANT!

  Only replace the cooling module when you have the replacement on hand. Contact your 

local vendor more details.

To replace the cooling module:

1.  Shut down your system and disconnect the cables from the ports on the rear panel.

2.  Remove the front cover from the enclosure.

3.  Loosen the thumb screws of the cooling module that needs replacement (A), open both handles to 

the opposite sides (B), then pull to remove the cooling module from the enclosure (C).

Thumb screw

Содержание EonStor GSa 5000 Series















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды