manualshive.com logo in svg

Infortrend EonStor GSa 5000 Series, Руководство по оборудованию

Поделиться
Скачать
Infortrend EonStor GSa 5000 Series Скачать руководство пользователя страница 52

3-2

Chapter 3: System monitoring

3.1.1 LEDs

This section details the system LEDs and their descriptions.

Front panel LEDs

Number

LED name

Color/

Status

Description

11

Service

The system is being serviced or is requiring services.

OFF

The system is not being serviced or does not require a 

service.

11

Power

The system is powered properly.
A power failure occurred in the system.

11

Cooling module 

status

The cooling module and fan built with the PSU are running 

normally.
A fan failure occurred.

11

Temperature 

status

The internal temperature is normal and within the safety 

threshold.
The internal temperature exceeds the safety threshold.

11

System fault

The system is operating normally.

The system encounters abnormal conditions.

IMPORTANT!  

If the cooling module status lights up in  , check the cooling module inside the 

enclosure or the fan built with the PSU.

Содержание EonStor GSa 5000 Series















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды