EonStor DS S48 Series Hardware Manual
4.
Insert the replacement module.
Make sure the
(1)
extraction handle is held at
its highest position so that the saddle notches on the sides of the handle can
snap onto the metal
(2)
anchor pins placed along the interior walls of the PSU
slot. Push the PSU into
(3)
chassis, and when you feel the contact resistance,
use slightly more force to engage the back-end connectors. Push the handle
downwards to secure the module.
5.
Fasten the retention screw.
6.
Reconnect the power cord.
7.
Power on the PSU module.
112
