39
Installing CBM for RAID Models
The CBM consists of a battery backup unit (BBU) and flash backup module (FBM).
The CBM can sustain cache memory in the event of a power failure or in the
extremely unlikely event of both PSUs failing at the same time. The use of a CBM is
highly recommended in order to safeguard data integrity. The CBM is an optional
item for the single-controller model and can be purchased from your system vendor.
The CBM has to be installed on the controller before rack-mounting the system.
NOTE
Dual controller model’s BBU and FBM are pre-installed!
Dual controller systems come with the BBU pre-install in the system while the FBM
may be default or an optional item. For details, please refer to
For single controller models, the CBM (BBU + FBM) will be pre-installed for you if
you ordered it as a part of the system. If you purchase the CBM afterwards as an
upgrade component, please read and follow the instructions in this section carefully.
Removing the RAID Controller
Loosen the screws
(1)
under the ejection levers
(2)
.
1
2
1
2
Push ejection levers downwards and the controller will ease out from chassis.
