Multitron - Operating Manual
Operation
Page
102
of
158
20 August 2020
10.
Tap the
Plus
or
Minus
key in the corresponding setting key area
to set the desired setpoint values and switch the parameters on
using the
ON/OFF
key.
Starting the timer
11.
Tap the
TIMER
key when all settings for the second phase are
correct
On the alphanumeric displays the messages
Strt
(upper) and
OFF
(lower) appear. In the lower display area the white sign
Setpoint
is lit up. This means that the timer function can now be started.
In the separate timer display area the sign
Timer
is lit up.
12.
Tap the
ON/OFF
key in the lower setting key area to start the
timer function.
On the alphanumeric displays the messages
Strt
(upper) and
run
(lower) appear. In the lower display area the white sign
Setpoint
is lit up. The display then changes to showing the remaining
time of the first phase on the upper and the message
run
on the
lower alphanumeric display.
In the separate timer display area the sign
Timer
is lit up. The
blue sign
Phase 1
is blinking.
