Infopia SelexOn, Инструкция по эксплуатации, Страница: 8 / 36

Code Registration
Step 3
Hold the label until the RFID information appears.
When the RFID code registration succeeds, the screen below appears.
Confirm if the "Marker", "Code" and "Exp. Date" information on the RFID
label of the strip box match with the RFID information displayed on the
LCD.
If they do not match, rerun the code registration. If the problem persists,
contact the nearest dealer.
<NOTE>
Please refer to 'Troubleshooting' if an error message appears.
<CAUTION!>
Ensure that the RFID code is registered when using a new strip box.
SelexOn .13
Code Registration
RFID Code Registration
The RFID must be registered prior to use when performing a test with a
new strip.
The RFID code needs to be registered once prior to use of a new strip
box.
Step1
In 'SetUp' mode, press the 'RFID' icon in order to run the RFID commu-
nications.
Step2
Place the RFID label of the strip box onto the "RFID Reader" on top of
the meter.
SelexOn
.
12