• 32 •
• 33 •
Quick reference of test procedure -Lipid test
1) After coding the meter, insert the test strip and
press Mode ( ) button
2) Prick the finger with a lancing device for
the sample blood.
3) Collecting the sample blood to the capillary rod.
4) Make sure the enough sample has been
collected to the capillary rod.
5) Contact the capillary rod with the sample to the
test area of the strip so as to start the test.
Caution
• If the test result is out of the test range, the Hi/Lo message will be shown on the LCD.
• Safely discard used test strips, lancets and capillary rods.
• It is required to insert the blood sample on the LipidPro
TM
test strip within 3 minutes
while the blood inserting icon is blinking.
Testing Your Blood
1. Lipid Profile test
When you collect the sample, please use the capillary rod provided with the test
strip package. Make sure enough sample has been collected to the capillary rod.
Place your fingertip to the top edge of glucose test
strip.
Apply your blood sample to the Lipid Profile strip
and do not take off capillary rod until you get the
beep sound. The test will automatically start.
2. Glucose test
Caution
If blood is stained outside the sample area, carefully wipe the stain out with a tissue.
Do not allow the wiping tissue to touch the open end of the sample area of the collecting leg.
[ Correct ]
completely
filled
poorly
filled
correct
incorrect
Correct : Completely filled
Incorrect : Poorly filled
[Incorrect ]
Caution
You may get an inaccurate result if the blood sample is not completely fill in a single
action.
Capillary blood process