Infomir MAG-200, Руководство оператора

Страница: 21 / 39

MAG-200 Operator Guide Rev 1.05.
Select:
(
5
) RSA (sign only)
What keysize do you want? (2048)
2048
Key is valid for? (0)
0
Is this correct? (y/N)
y
Real name:
Email address:
Enter passphrase:
2. Export of the key to the file:
gpg -o oppubbin.KEY --export “key ID ”
after performing this command the public part of the key shall be contained in the
file oppubbin.KEY ;
3. Send the file oppubbin.KEY to the manufacturer for creating a digital signature
of this key with the use of the manufacturer key .
4. Install the resulting file in the device.
Default operator key
Default operator key is installed in the device with the following parameters:
•
USER_ID
- STB_PUBLIC;
•
Key fingerprint
- 2CE3 2C86 F4D4 D561 E676 B77B 8D87 EE65 6BEE
D1ED;
•
passphrase
- absent.
The file stb_secbin.key contains the secret and public parts of this key. The file
stb_pub_sign.key contains the public part of the key signed with manufacturer key and
prepared for the installment to the device. The files stb_secbin.key and
stb_pub_sign.key are usually supplied as the part of the program. If the operator key is
not installed in the device or if it was reset the above-mentioned key is used as the
operator key. We recommend to use this key for adjusting and checking the system
workability. This key is used in the images supplied by the manufacturer. In the cases
when operator uses his own key he must reassemble these images using his operator
key for starting them in the device.
21