11
IR Remote Controller Explanation
0. Standby Button
Press this button to enter standby mode. Press it again
to enter normal mode.
(Note: Power consumption in standby mode is
approximately half of the normal mode)
1. Position Buttons
To set preset or call preset
2. * Button
3. Set/Clear Preset Buttons
Set preset:
Store a preset position
[SET PRESET] + Numeric button (0-9):Setting a
corresponding numeric key preset position
Clear preset:
Erase a preset position
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the preset
individually
Or: [#]+[#]+[#]: Erase all the preset
4. BLC (Backlight Compensation) Button
BLC ON/OFF:
Press this button to enable the
backlight compensation. Press it again to disable the
backlight compensation.(NOTE: Effective only in
auto exposure mode)