5
SETTING UP THE PROJECTOR
1
Place the projector on a flat surface.
•
The projector must be within 10 feet of your power source
and within 6 feet of your computer.
•
If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear Projection”
on page 27 to reverse the image.
•
If you are installing the projector on the ceiling, refer to the
LitePro 200 Series Ceiling Mount Installation Guide
for more
information. To turn the image upside down, see “Ceiling”
on page 27. The Ceiling Mount Kit is sold separately; see
page 44.
2
Position the projector the desired distance from the screen.
•
The distance from the lens of the projector to the screen
determines the size of the projected image. Figure 2 shows
three projected image sizes using the varifocal lens or the
zoom lens at minimum focusing distance. For more infor-
mation about image size, see “Projected Image Size” on
page 50.
3
Make sure the projector and your computer are turned off.
F
IGURE
2
Projected image size (varifocal lens, zoom lens at minimum focusing distance)
2.8
ft.
17
.5
ft.
7 f
t.
4 ft
.
10 ft.
25 ft.
