InFocus INV30, Руководство пользователя, Страница: 3 / 17

3 | 1025289 Rev 01
Safety warnings, cautions and important information
Follow all the warnings, precautions and maintenance instructions in this document and on the InFocus Support web site InFocus.com/Support
Precautions

Do not look into the projector’s lens when the lamp is on. The bright light may damage your eyes.

To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.

Do not open or disassemble the projector as this may cause electric shock.

Before replacing the lamp, allow the projector to cool down and then turn it off. Disconnect the projector from the power outlet, and follow all the lamp
replacement instructions.

When you switch the projector off, ensure that the cooling cycle is complete before disconnecting the power. Allow 90 seconds for the projector to
cool down.

To extend lamp life, avoid turning the projector on and off frequently. Once you have turned on the projector, keep it on for a minimum of 15 minutes.

When the lamp is approaching
the end of its life, the message “Lamp is approaching the end of its useful life in full power operation” appears on the
screen. Contact your local reseller or service center to change the lamp as soon as possible.
Additional maintenance instructions

Turn off the product before cleaning it.

Use a soft cloth moistened with a mild detergent to clean the display housing.

Disconnect the power plug from the AC outlet if the product isn’t being used for a long period of time.

Do not block the ventilation slots and openings on the unit.

Do not use abrasive cleaners, waxes or solvents to clean the unit.

Do not use in extremely hot, cold or humid environments:

Do not stare into the beam, RG2.
“As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015”

Do not look directly into the lens, eye damage could result.
EU standards
IEC 60950-1:2005 (Second Edition); Am1:2009 + Am2:2013. IEC62471-5:2015.
InFocus INV30(V30) projector product features
This product is a single-chip DLP® projector. Features include the following:

DLP technology

XGA 1024 × 768 resolution

4:3 with support for 16:9, 16:10 and 5:4 with scaling

Short throw 0.63:1 ratio

99 cm (39") minimum throw distance

3000 lumens in 240 W mode at a CCT of 6500 K by the IEC method

Computer compatibility
o
Mac OS X
o
Windows®

Video interface compatibility
o
HDCP compliant HDMI, Composite, VESA® RGB with additional interface support for Component YPbPr and Component YCbCr inputs
with the proper adapters (not included)

Video system compatibility
o
HDTV (720p and 1080p) video system compatibility and HD Ready (HDMI technology and 720p) available, NTSC, NTSC 4:43, PAL,
PAL-N, PAL-M and SECAM (480i/p and 576i/p)

Remote manager via network and RS-232

17,000:1 contrast ratio