InFocus INV30, Руководство пользователя, Страница: 15 / 17

Filter Cleaning Instructions: SP.74013GC01
15 | 1025289 Rev 01
Regulatory
Clean Filters Note INV30(V30)
Warning:
Cleaning a wall-mounted projector can result in a fall or injury. Use caution when climbing a ladder.
Caution:

Before you clean the projector press the Power button twice on the remote control or projector keypad to put the
projector in Standby mode, then wait 90 seconds for the fan to turn off.

Never touch the lens with your hands or a brush.

Do not allow liquids or commercial solvents of any kind to flow into the projector base or head.
Do not spray cleaners or solvents near any part of the projector because they can spread a chemical mist on some of the
projector’s components and lamp, resulting in damage, staining or poor image quality.

Do not use compressed air to clean the projector.
A message will appear reminding you to clean the filters.
When cleaning the air filters:
Use compressed air to clean the filters.
You can also order replacement air filters (part no. SP.74013GC01) from your authorized InFocus
reseller. It contains two replacement air filters.
To clean the air filters
1.
Locate the two filters on each side on the rear of the projector.
2.
Remove the filters from the projector.
3.
Clean the filter with compressed air. Insert the clean filter.