English 31
USING THE MRPJECTPR
Note:
These options are only available if the 3D mode function is disabled, the
Wall Color
setting is not set
to
Blackboard
, and the
Display Mode
setting is not set to
DICOM SIM.
or
HDR SIM.
.
In 3D mode, user can only select
3D
for
Gamma
setting.
If the
Wall Color
setting is set to
Blackboard
, user can only select
Blackboard
for
Gamma
setting.
If the
Display Mode
setting is set to
DICOM SIM.
, user can only select
DICOM SIM.
for
Gamma
setting.
If the
Display Mode
setting is set to
HDR SIM
., user can only select
HDR SIM.
for
Gamma
setting.
Color Settings
Configure the color settings.
BrilliantColor
TI
: This function utilizes a new color-processing algorithm and enhancements to enable
higher brightness while providing true, more vibrant colors.
Color Temperature
: Select a color temperature from Warm, Standard, Cool, or Cold.
Color Iatching
: Select the following options:
–
Color: Select the color to adjust: red, green, blue, cyan, yellow, magenta, or white.
–
Hue / R(red)*: Adjust the hue (color) of the color selected in the
Color
setting.
Note:
*If the selected color is
White
, you will adjust the red level.
–
Saturation / G(green)*: Adjust the saturation (offset) of the color selected in the
Color
setting.
Note:
*If the selected color is
White
you will adjust the green level.
–
Gain / B(blue)*: Adjust the gain (level) of the color selected in the
Color
setting.
Note:
*If the selected color is
White
you will adjust the blue level.
–
Reset: Return the factory default settings for color matching.
–
Exit: Exit the “Color Matching” menu.
RGB Gain/Bias:
This function adjusts the gain and bias of individual colors.
–
Reset: Return the factory default settings for RGB gain/bias.
–
Exit: Exit the “RGB Gain/Bias” menu.
Color Space (non-HDII input only)
: Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
Color Space (HDII input only)
: select an appropriate color matrix type from the following: Auto, RGB
(0-255), RGB (16-235), and YUV.
Signal
Adjust the signal synchronization settings for VGA/Component sources.
Automatic
: Configure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
Frequency
: Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to flicker vertically.
Mhase
: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
H. Mosition
: Adjust the horizontal position of the image.
V. Mosition
: Adjust the vertical position of the image.