InFocus INF6502WB, Руководство пользователя

Страница: 14 / 65

DRAFT
Page 11 INF6502WB/INF6502LC/INF7002WB/INF7002LC User Guide
Insert LightCast key (INF6502LC/INF7002LC only)
If your monitor did not ship with a LightCast key and you would like to use the LightCast features, you can purchase
a LightCast key (p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www.
infocusstore.com) or your local dealer.
1) Insert LightCast key into an available USB A port on the back of monitor.
Connecting AC Power
1) Connect one end of the AC power cord to the AC In jack on the back of the monitor.
2) Connect the other end of the AC power cord to an AC outlet.
3) Press the power switch. (The LED on the front of the monitor turns on.)
NOTES:
• Your monitor should only be operated from the power source indicated on the label.
• Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period
of time.
External PC Touchscreen Control Setup
1) Connect an external computer to the monitor using a DVI, HDMI, or VGA cable.
2) Connect the Type A to Type B USB cable to the USB Type A jack on the computer and to the USB Type B jack on
the side of the monitor.
3) The computer can now be controlled by using touchscreen gestures on the monitor.
TURNING THE MONITOR ON/OFF
1) Verify that the power cord is connected to a power outlet and that the power switch is
ON
.
2) Press the Power button on the remote or the right side of the monitor.
NOTE
: By default, the monitor goes into system standby after 30 minutes of inactivity. To change this behavior, use the
Power Save Mode feature in the menu system.