manualshive.com logo in svg

InFocus IN13x Series, Руководство пользователя, Страница: 67 / 82

Поделиться
Скачать
InFocus IN13x Series Скачать руководство пользователя страница 67

67

English

Appendices

Replacing the Lamp

The projector automatically detects the lamp life. When the 

lamp life is nearing the end of use, you will receive a warning 

message.

When you see this message, please contact your local reseller 

or service center to change the lamp as soon as possible. 

Make sure the projector has been cooled down for at l

east 

30 

minutes before changing the lamp. 

 

Warning: Lamp compartment may be hot! Allow it to cool 

down before changing the lamp!

 

Warning: To reduce the risk of personal injury, do not drop 

the lamp module or touch the lamp bulb. The bulb may 

shatter and cause injury if it is dropped.

 

Warning: If ceiling mounted, please use caution when 

 

opening the lamp access panel. It is recommended to wear 

safety glasses if changing the bulb when ceiling mounted. 

“Caution must be used to prevent any loose parts from 

falling out of projector.”

Содержание IN13x Series



















































































Отзывы:

Нет отзывов