manualshive.com logo in svg

InFocus IN13x Series, Руководство пользователя, Страница: 64 / 82

Поделиться
Скачать
InFocus IN13x Series Скачать руководство пользователя страница 64

64

English

Appendices

 The projector stops responding to all controls

 Check that “Keypad Lock” is not activated by trying to control the 

projector with the remote control.

 If p

ossible, turn off the projector, then unplug the power cord and 

wait at least 60 seconds before reconnecting power.

 

Blurry double image

 Enter the 3D control menu to switch “Off” the 3D feature if normal 

2D images are blurry or double images.

 

Two images, side-by-side format

 Press “3D Format” button and switch to “SBS” for input signal is 

HDMI 1.3 3D 1080i side-by-side.

 

Image does not display in 3D

 Check if the 3D glasses are turned on.

 Make sure the batteries of the 3D glasses are not exhausted.

 When the input signal is HDMI 1.3 3D (1080i side-by-side half), 

press “3D Format” button and switch to “SBS”.

 

Lamp burns out or makes a popping sound

 

When the lamp reaches its end of life, it will burn out and may 

make a loud popping sound. If this happens, the projector will not 
turn on until the lamp module has been replaced. To replace the 
lamp, follow the procedures in the “Replacing the Lamp” section on 

pages 67-68.

Содержание IN13x Series



















































































Отзывы:

Нет отзывов