InFocus IN112xa, Руководство пользователя, Страница: 16 / 66

16
English
Installation
Powering the Projector On / Off

Turn on the
projector first and
then select the
signal sources.
Powering On the Projector
1. Securely connect the power cord and signal cable. When
connected, the ON/STANDBY LED will turn Amber.
2. Turn on the lamp by pressing “ ” button either on the top
of the projector or on the remote. The ON/STANDBY LED
will now turn Green.

The startup screen will display in approximately 10 sec -
onds. The first time you use the projector, you will be asked
to select the preferred language and power saving mode.
3. Turn on and connect the source that you want to display
on the screen (computer, notebook, video player, etc). The
projector will detect the source automatically. If not, push
menu button and go to “OPTIONS”.
Make sure that the “Source Lock” has been set to “Off”.

If you connect multiple sources at the same time, press
the “SOURCE” button on the control panel or direct source
keys on the remote control to switch between inputs.

When Power mode
(Standby) is set to
Eco (<0.5W), the
VGA output and
Audio pass-through
will be deactivated
when the projector is
in standby.
Power
1