6
The projector’s lamp has a lifetime of 1000 hours.
Low lamp symbol
Shown on screen when remaining lamp life is critically low.
Lamp light
Turns on when remaining lamp life is low, or when lamp life
has expired (also turns on if the lamp unexpectedly fails).
To buy a new lamp
, go to
www.infocus.com/store
Before replacing the lamp
, unplug the projector and wait 1 hour.
Detailed instructions are included with the replacement lamp.
Projector controls and status lights
Disconnecting an expansion module
lamp light
see
Projector lamp
(below) for more info
wait light
blinks while the projector is warming up or cooling down
power button
turns the projector on and off
input button
switches between video sources (composite
video, S-video, plus any sources from an expansion module)
volume buttons
adjust
speaker audio volume
brightness buttons
adjust
picture brightness
Projector lamp
Place the module on a firm flat
surface and turn off and unplug
the projector.
Press in the release button under
the front of the module.
Lift the front of the projector up
slightly.
Lift the projector completely off the
module.
Replace the rubber connector cover
on the bottom of the projector.
1
2
3
4
3
4
1
2