Please read the safety instructions booklet before setting up
the projector.
Make sure the projector is turned off and the power cord is unplugged
before connecting or disconnecting a module.
i
i
2
Connect expansion module
(if purchased with projector)
1
2
3
Completely retract the projector’s
elevator foot (if needed)
Remove the rubber connector cover
from the bottom of the projector
Look at the outline on top of the
module to correctly position the
projector
Snap the projector down onto the
module
4
The foot is under the front of the projector.
Save it in case you disconnect the module later.
Unpack the box
Here's what's included:
1
Press down until you hear a ‘click’.
Projector
Power Cord
Outline
i
i
Audio/video cables are not
included.
You can buy them at
www.infocus.com/store
or from
your local electronics retailer.