InFocus Genesis P130, Руководство по введению, Страница: 36 / 82

36 InFocus Corporation — Introduction Guide - DLP Multimedia Projector
NOTE When pointing the remote control directly (0 degrees angle) on the IR sensor, the distance between
the remote control and the sensor should not be longer than 8 meters (~ 26 feet).
Remote control effective range
Infra-Red (IR) remote control sensor is located on top of the projector. Ensure to hold the remote control at an angle
within 30 degrees perpendicular to the projector’s top IR remote control sensor to function correctly. The distance
between the remote control and the sensor should not be longer than 6 meters (20 feet).

Make sure that there are no obstacles between the remote control and the IR sensor on the projector that
might obstruct the infra-red beam.

Avoid using the remote control in direct sunlight or bright fluorescent lights at near range, as the projector
may not respond to commands under these conditions.

Please keep the remote control at least 7 feet 2 meters away from fluorescent lamps otherwise the remote
control may not operate as intended.

If the remote control is close to Inverter-Type fluorescent lamps, it might become ineffective from time to
time.

If the remote control and the projector are within a very short distance, the remote control may become
ineffective.

When pointing the remote control towards a projection screen or whiteboard, the effective distance of
20 feet 6 meters from remote to screen to projector may be shortened due to the IR reflectivity of the screen
or white board surface.
Views of your InFocus