manualshive.com logo in svg

Infoblox ND-4005, Руководство по установке

Поделиться
Скачать
Infoblox ND-4005 Скачать руководство пользователя страница 20

Copyright ©2018, Infoblox, Inc.All right reserved.

1.  

2.  

3.  

4.  
5.  

6.  

Fasten the catch tab of the rack rail on the front of the rack space designated for the appliance. Each rack rail (2) in the adjustable rail kit
provides a metal catch tab on the front end of the rack rail. This catch tab fastens to a square mounting hole as shown in the figure
below. 
Catch tab fastens on front posts of designated space

Extend the rack rail assembly backwards, align the mounting holes on the chassis slide rails with the required cage nuts, and fasten the
back end of the rack rail to the two cage nuts on the rear post of the designated space. As noted, the rack rail assembly has an extension
range from the minimum of 600mm to a maximum of 900mm.
Perform Steps 2 and 3 for the second rack rail assembly.
Attach the chassis slide rails to each side of the chassis with three (3) flathead 8-32 screws, in the orientation shown in the figure below.

Chassis slide rails Installation

Содержание ND-4005




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды