CT-ILPC ASSEMBLY INSTRUCTIONS
SHROUD INSTALLATION
E1.
Attach the two offset double shroud brackets to the Main Upright using the
preinstalled button head screws and washers.
E1.
Attach five double shroud brackets to the Main Upright using the preinstalled button
head screws and washers.
E2.
Attach the one single side shroud bracket to the Main Upright behind the lower
pulley using the pre-installed button head screw and washer.
E3
. Attach the front shroud to the brackets using 7
–
1/4
”
x
¾”
button head screws and
1/4
”
washers.
E4
. Attach the rear shroud to the brackets using 8
–
1/4
”
x
¾”
button head screws and
1/4
”
washers.
Note: Remove the protective covering from the placard on the front shroud.
12
