8
Battery Installation and Removal
1.Please follow below drawing, step by step to install battery.
Step 1: Push down button, same time, pull out dust-bin.
Step 2: Let QQ6 flip over. Follow the Arrow direction of battery, and
take battery into slot.
Step 3: Let plastic hook lock battery ready.
Step 4: Put back dust-bin into QQ6.
Push down “Button", same
time Pull out "Dust-bin"
Step 1
Step 1
Step 2
Step 2
Step 3
Step 4
2.Please follow below drawing, step by step to remove battery.
Step 1: Pull 2 hooks in the same time, battery will be popup itself.
Step 2: Take out battery.
17
Setting ID with Main unit
Purpose
：
Status of main unit indicator lamps when
studying
Charging station 1 Chargi ng station2 Sonic wall 1 Sonic wall 2
Light up
------- Means the
ID has been used already
Light off
------ Means the
ID has not been used yet
Tip: Each one main unit at most can be equipped with two
charging stations and 2 sonic walls at the same time.
Step:
Push the start button on the main unit,
Then press the uv button all
until heard ‘DI-DI’ sounds
，
and the display panel show
【
Cd
】，
it means the main unit into study mode already.
a) Let the main unit into study mode:
the time,
b) Let the charging station start to study:
There are two and display symbols to locate two charging station.
does not light up, you can follow the steps to set up ID.
Any one of symbols
Step 1: Power on the charging station.
Step 2: Press the time setting button all the time, until heard DI - DI ’’
’’
sounds, and one of the two buttons symbol will light up (the symbol must
light off before)
，
it means the charging station complete the study.
If lost or buy new one of charging base, sonic wall,
You need setting ID into new unit for communication with
.
How to set up ID:
QQ6
