3
ORDERING INFORMATION
Multi-mode products
:
N3574XA-1-M/R
Digital 1 duplex factory selectable audio transceiver, module/card
N3574XB-1-M/R
Digital 1 duplex factory selectable audio transceiver, module/card
N3574XA-4-M/R
Digital 4 duplex factory selectable audio transceiver, module/card
N3574XB-4-M/R
Digital 4 duplex factory selectable audio transceiver, module/card
N3574XA-8-M/R
Digital 8 duplex factory selectable audio transceiver, module/card
N3574XB-8-M/R
Digital 8 duplex factory selectable audio transceiver, module/card
N3574XA-12-M/R
Digital 12 duplex factory selectable audio transceiver, module/card
N3574XB-12-M/R
Digital 12 duplex factory selectable audio transceiver, module/card
Single-mode products
:
N3774XA-1-M/R
Digital 1 duplex factory selectable audio transceiver, module/card
N3774XB-1-M/R
Digital 1 duplex factory selectable audio transceiver, module/card
N3774XA-4-M/R
Digital 4 duplex factory selectable audio transceiver, module/card
N3774XB-4-M/R
Digital 4 duplex factory selectable audio transceiver, module/card
N3774XA-8-M/R
Digital 8 duplex factory selectable audio transceiver, module/card
N3774XB-8-M/R
Digital 8 duplex factory selectable audio transceiver, module/card
N3774XA-12-M/R
Digital 12 duplex factory selectable audio transceiver, module/card
N3774XB-12-M/R
Digital 12 duplex factory selectable audio transceiver, module/card
INSTALLATION
Installation of audio interface
To install the apparatus, it is necessary to allow enough space to accommodate the bend
radius of the optical cable connected to it. Audio interface uses 1, 2 and 3 20-position
terminal block connectors for 1A,4A, 8A and 12A transmission respectively.
Installation of card unit
To install in the chassis, orient the card with the Infinova logo at the top of the module and
slide onto the top and bottom card guides in the chassis. Press securely on the top and
bottom of the module to ensure that it is fully seated in the chassis so that the electrical
connector mates with the chassis-mounted motherboard. Once installed, manually tighten
the two thumbscrews located at the top and bottom of the card. Do not use tools to secure
these and do not over tighten.