Infinity Modulus II Infinity, Руководство по обслуживанию

Страница: 5 / 35

1
2
3
6
7
16
17
18
20
21
22
24
26
8 10 11 12
13
14
9
25
27
28
23
19
4 5
MS-1
II
Cabinet – Not for Sale
MS-
1
II
EXPLODED VIEW
Infinity Systems, 250 Crossways Park Drive, Woodbury, New York 11797
6/04
ITEM
NO.
DESCRIPTION QTY. PART NO.
1. Front Grille (platinum) 1 244-040-00254W
(charcoal) 1 244-040-00254G
2. Aluminum Face Plate 1 Not For Sale
3. Grommet (platinum) 4 327-
010
-00112W
(charcoal) 4 327-
010
-00112B
4. Screw 6 352-AM04020D603
5. Baffle 1 Not For Sale
6. Woofer 1 10PR80BZR-DW01
7. Screw 4 351-LM04006A565
8. Tweeter 1 60DA20AD-DT01
9. Screw 2 352-CM03010D593
10. Screw 4 352-FM04014P602
11. Crossover 1 0B-1500-00751
12. Screw Cap 1 354-HM05418
13. Skidproof Sheet 1 355-L0507239
14. Washer Sheet 1 355-P0510240
ITEM
NO.
DESCRIPTION QTY. PART NO.
15. Rear Cabinet (platinum) 1 Not for Sale
(charcoal) 1 Not for Sale
16. Left Terminal 1 215-000-00792
17. Right Terminal 1 215-000-00793
18. Bracket Ball 1 325-AL-00187
19. Aluminum Plate (platinum) 1 320-AL-00184-0WA
(charcoal) 1 320-AL-00184-0W
20. Aluminum Base 1 320-AL-00185
21. Back Foot Base 1 320-RUB-00186
22. Rubber Strip 1 398-RUB-00249
23. Bracket Holder 1 320-AL-00416
24. Screw 1 351-KM04012A578
25. Wrench Box 1 398-ABS-00250
26. Wrench 1 399-FE-00618
27. Screw 1 351-AM03005A015
28. Iron Plate 1 399-FE-00619
Technical Manual
MS-1
II
TO SERVICE THE MS-1
II
1. Remove the grille.
2. Remove the (4) exposed rubber grille retainers; this can be accomplished by carefully pulling them out of their cavities with long-nosed pliers or
similar tool.
3. Remove the (4) Phillips screws underneath, that are now exposed.
4. Remove the (2) additional screws in their respective cavities at the rear of the housing; push the wall bracket to one side for access with a
screwdriver bit.
5. Carefully lift the front baffle, with drivers attached, off the cabinet. Caution – do not pull on the corner of the metal baffle shield, or you may
dislodge it from the front baffle.
Rev2 03/05
320-AL-00187