Infinity iFX-640 Скачать руководство пользователя

Страница: 47 / 52

iFX-640

Product code: 41552

Maintenance

Safety Instructions for Maintenance

DANGER
Electric shock caused by dangerous voltage inside

Disconnect power supply before servicing or cleaning.

WARNING
Risk of burns due to hot surface

Allow the device to cool down for at least 15 minutes before servicing or cleaning.

Preventive Maintenance

Attention
Before each use, examine the device visually for any defects.

Make sure that:

●

All screws used for installing the device or parts of the device are tightly fastened and are not
corroded.

●

The safety devices are not damaged.

●

There are no deformations on housings, fixations and installation points.

●

The lens is not cracked or damaged.

●

The power cables are not damaged and do not show any material fatigue.

Содержание iFX-640





















































Результаты поиска

Содержание iFX-640

Отзывы:

Похожие инструкции для iFX-640

Бренды по названию

Популярные бренды

Infinity iFX-640, Руководство пользователя

Результаты поиска

Содержание iFX-640

Отзывы:

Похожие инструкции для iFX-640

Бренды по названию

Популярные бренды