Infinity ICE4000, Руководство по аппаратному обеспечению и установке

Страница: 33 / 37

Chapter 2
2-12 ICE 4000 Hardware and Installation Manual 940265-001, rev. D
Initializing the ICE Terminal
After the terminal receives a new program load, an initialization is required to start the terminal
operations. In other cases, when options are changed,
such as a new card type, an initialization is
required to update the terminal parameters. An initialization takes approximately 30 seconds to
complete.
During an initialization, the terminal automatically connects to the initialization host to receive the
downloading of the initialization parameters, known as the
terminal profile .
Step-by-Step
To initialize an ICE terminals:
Step Action Terminal response
1 Touch Menu on the terminal.
N
OTE
: The Idle prompt may vary depending on the terminal and
its configuration.
MAIN X
New Trans Batch
Reports Terminal
Server Tab
Setup Tests
Browser Functions
Supervisor
2 Touch
Terminal
on the terminal display.
TERMINAL
Ì
X
Initialize Prog Load
Shift View
Train Mode Logon
ICE-PAC NMS Call
StatCall Deployment
Lock Reset
3 Touch
Initialize
on the terminal display.
INITIALIZE X
Correct?
No Yes
4 Touch Yes on the terminal display to confirm. The terminal
begins dialing the host.
COMMS
DIALING NOW
The terminal loads the initialization parameters. This process
takes 25 seconds.
COMMS
PROCESSING NOW
The initialization is complete.
COMPLETE
Transaction complete
Continue