Infinity ICE4000, Руководство по аппаратному обеспечению и установке

Страница: 32 / 37

Installation Procedures
940265-001, rev. D Hypercom Corporation 2-11
Program Loading the ICE Terminal
A program load is required when no software is currently in the terminal. Depending on the
software application, an average program load takes approximately 40 minutes to complete. The
initialization process loads the merchant-specific information in a terminal.
In order to process debit transactions, you must authenticate or MAC (Message Authentication
Code) the software in the ICE 4000 terminal. Please refer to the
PIN Pad Loader Operator ’ s
Manual for further details.
Step-by-Step
To load a program into the ICE terminal:
Step Action Terminal response
The boot menu appears.
PLEASE INITIALIZE
OR CALL HELP-FE
Restart
Merchant Program
Program Load
Clear Page Memory
Maintenance Funcs
Fast Load
1 Touch
Program Load
on the terminal display.
PROGRAM LOAD
CORRECT?
NO YES
2 Touch Yes on the terminal display, or touch Enter on the
terminal. The terminal checks the phone line for a proper
connection.
PROGRAM LOAD
CHECKING LINE
The terminal detects a proper phone line connection and is
waiting to detect a dial tone.
PROGRAM LOAD
WAITING FOR DIAL TONE
The terminal detects a dial and is waiting to dial out.
PROGRAM LOAD
DIALING NOW
The terminal has dialed out and is waiting for an answer from
the host.
PROGRAM LOAD
WAITING FOR ANSWER
The terminal has made a connection and is communicating
with the host.
PROGRAM LOAD
TRAINING MODEM
The terminal is downloading the software application from the
host. The approximate time is 25 to 45 minutes.
PROGRAM LOAD
LOADING MEM 01 X X X X
The terminal has successfully downloaded the software
application from the host.
PROG. LOAD
PROG. LOAD GOOD